TRAINING FIBER OPTIC SYSTEM

PELATIHAN FIBER OPTIC SYSTEM

Pelatihan FIBER OPTIC SYSTEMTUJUAN PELATIHAN FIBER OPTIC SYSTEM  :
1. Measuring fiber characteristics
2. Verifying and troubleshooting with lost test set and OTDR
3. Building, testing and repairing connectors and splices
4. Selecting the appropriate fibers and cables to meet your needs
5. Identifying and working around fiber-optic installation problems
6. Predicting design performance and verifying after the actual installation
7. Making sense of OTDR traces

PESERTA PELATIHAN FIBER OPTIC SYSTEM
Technicians, installers, supervisors, engineers, designers and
contractors

MATERI PELATIHAN FIBER OPTIC SYSTEM

1. Fiber Types and Materials
* How fibers guide light
* Differentiating between core and cladding
* Index of refraction
* Light rays and light waves
* Singlemode fiber (SMF) and multimode fiber (MMF)
* How SMF and MMF are different
* Choosing fiber based upon your communication needs
* Trading ease of use for highest performance
* Planning for the future

2. Specifying Fibers
* Loss and attenuation of fibers
* Understanding how loss is measured
* Inherent loss factors: scattering and absorption
* The effect of light color on loss
* Using a loss test set
* Budgeting the loss
* Bandwidth: the capacity for information
* Causes of distortion
* Dispersion
* Modes
* When bandwidth is an issue
* Physical sizes of fiber
* Why fibers have different sizes
* The impact of numerical aperture
* Dealing with manufacturing tolerances

3. Using Fiber Optic Transmitters and receivers
* Light sources
* 1st, 2nd and 3rd “windows”
* LEDs vs. lasers
* Wavelength division multiplexing
* Detecting light with photodiodes
* Wavelength agility
* How to factor in speed
* What to look for in test instrumentation
* Responsivity : the calibration factor

4. Designing Cable Plants
* Indoor cable
* Structural issues: connection, identification and installation
* Abiding by the fire code
* Why tight buffer is common
* Outdoor cable
* Underground vs. aerial cable
* Loose tube
* Ribbon
* Slotted core
* Avoiding moisture contamination
* Benefiting from structured cabling options
* Surveying structured cabling standards
* Vendor interpretations

5. Verifying Cable Installations: Testing Tips and Techniques
* Acceptance testing
* Testing continuity: the first step
* Examining cable plant loss
* Locating mismatch problems
* Troubleshooting fiber systems
* Knowing when to troubleshoot
* Common steps to identify the problem
* Sources of difficulty you should know

6. OTDR : Optical Time Domain Reflectometer
* Testing fiber paths with OTDR
* Using the OTDR before, during and after cable
* installation
* Safety concerns
* Interpreting OTDR traces
* Capabilities and limitations of OTDR
* Relying on your own interpretation

7. Selection Connectors and Splices
* Quality factors
* Throughput and return loss
* Cost differentials
* Durability
* Fresnell reflection and index matching
* Mechanical and fusion splices
* When to consider fusion splicing
* Pros and cons of mechanical splicing
* Identifying different types of connectors (ST, SC, FC, SMA,
Biconic, D4, Non-ontact and physical contact/PC)

8. Building Connectors and Splices

· Practical fiber termination
· Installing ST connectors
· Joining fibers with mechanical splices
· Tuning splices
· Repairing connectors

9. Cutting Edge Technologies

· Advanced fiber-optic components
· Fiber couplers
· Optical amplifiers
· Wavelength Division Multiplexers (WDM)
· Advantages of specialty fibers

INSTRUCTOR PELATIHAN FIBER OPTIC SYSTEM

Dr. Ir. Ian Josef Matheus Edward, MT and Team

Agenda Pelatihan :

  • 2 sd 4 Januari 2019
  • 13 sd 15 Februari 2019
  • 27 sd 29 Maret 2019
  • 17 sd 19 April 2019
  • 7 sd 9 Mei 2019
  • 12 sd 14 Juni 2019
  • 17 sd 19 Juli 2019
  • 14 sd 16 Agustus 2019
  • 12 sd 14 September 2019
  • 16 sd 18 Oktober 2019
  • 21 sd 23 November 2019
  • 26 sd 28 Desember 2019

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi dan investasi Pelatihan  :

  • Yogyakarta(6.500.000 IDR / participant)
  • Jakarta(6.500.000 IDR / participant)
  • Bandung (6.500.000 IDR / participant)
  • Bali (7.500.000 IDR / participant)
  • Surabaya (6.000.000 IDR / participant)
  • Malang (7.000.000 IDR / participant)
  • Batam (7.500.000 IDR / participant)
  • Lombok(7.500.000 IDR / participant)

Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Fasilitas Pelatihan Chain Management :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE TransporsiPeserta ke tempat pelatihan .
  • Module atau Handout
  • FREE Flashdisk
  • Sertifikat
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2x Coffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

Info : +62 813-9174-4490 || info@jakarta-trainingcenter.com

training online